Honda CG 125 Carburetor OEM Motorcycle Parts Cg Fan 125 Zinc Alloy Material

Carburador Honda CG 125 FAN OEM Motorcycle Parts Cg Fan 125

Product Quick Details:

Motorcycle carburetor CG 125 FAN works by mixing the right amount of gasoline fuel with air so that the engine runs properly. Most carburetors used on motorcycles also use a throttle plate to adjust the airflow inside the motorcycle engine.

Carburator Adjustment:

The fuel and air mixture is too rich when it has an excess of fuel, and too lean when there is not enough. The mixture is adjusted by one or more needle valves on an automotive carburetor, or a pilot-operated lever on piston-engined aircraft (since the mixture changes with air density and therefore altitude). Independent of air density the (stoichiometric) air to gasoline ratio is 14.7:1, meaning that for each mass unit of gasoline, 14.7 mass units of air are required. There are different stoichiometric ratios for other types of fuel.

Ways to check carburetor mixture adjustment include: measuring the carbon monoxide, hydrocarbon, and oxygen content of the exhaust using a gas analyzer, or directly viewing the color of the flame in the combustion chamber through a special glass-bodied spark plug sold under the name "Colortune"; the flame color of stoichiometric burning is described as a "Bunsen blue", turning to yellow if the mixture is rich and whitish-blue if too lean. Another method, widely used in aviation, is to measure the exhaust gas temperature, which is close to maximum for an optimally adjusted mixture and drops off steeply when the mixture is either too rich or too lean.

aftermarket motorcycle parts

motorcycle replacement parts

Honda CG 125 Carburetor OEM Motorcycle Parts Cg Fan 125 Zinc Alloy Material Images